Electrical Service Calls & Repairs
Something Not Working? Let Us Find Out Why.
Electrical problems almost never happen at a convenient time. It is a Sunday night, or the morning you have people coming over, or the middle of a snowstorm. Half the kitchen goes dark, the breaker will not stay on, and now you are standing in front of the panel wondering if it is safe to flip it again.
Take a breath. That is what we are for. Silver Stone Electric provides electrical repair services Utah homeowners can call when something has gone wrong and they want it handled by someone who knows what they are looking at.
We are a licensed and insured shop covering Summit, Wasatch, Utah, and Salt Lake counties. Call or text (435) 640-9740 and tell us what is happening.
First: Should You Be Worried?
Some problems can wait a few days. Some cannot. Here is the honest line between them.
Stop using the circuit and call right away if you notice any of this:
- A burning smell, or plastic that looks melted or discolored
- An outlet or switch plate that is warm or hot to the touch
- Sparks when you plug something in
- Buzzing or crackling from a panel, outlet, or switch
- A breaker that trips again the moment you reset it
- Any part of your panel that is scorched or rusty
Those are the ones we treat as emergency electrical repair situations. Do not wait for a better time.
Less urgent but still worth fixing soon: one dead outlet, a flickering fixture, a light that hums, a GFCI that will not reset, or a breaker that trips only when the vacuum and the microwave run together.
What We Fix
Most of our electrician service calls Utah work falls into a handful of buckets.
- circuit breaker tripping over and over, or a breaker that has failed outright
- outlet not working, loose outlets, and outlets that only work sometimes
- flickering lights repair, dimming when appliances start, and lights that burn out fast
- electrical short circuit faults and ground faults
- faulty wiring repair, including backstabbed connections and old junction boxes
- Failed switches, dimmers, and three-way switches that fight each other
- GFCI and AFCI devices that keep tripping
- Panel problems, loose lugs, double-tapped breakers, and burnt bus bars
- Smoke detectors, bath fans, ceiling fans, and dead exterior outlets
How We Actually Diagnose It
Anybody can replace an outlet. The value is in electrical problem diagnosis that finds the real cause, because if you only fix the symptom, you will be calling somebody again in two months.
Our process on a typical call:
- We ask you what happened and when. You know more than you think you do.
- We check the panel and the circuit layout first.
- We test at the device, then work backward along the circuit.
- We open the boxes that need opening, not every box in the house.
- We show you what we found before we fix it.
That last step is the one people remember. You should get to see the burnt neutral or the loose connection with your own eyes. Our electrical troubleshooting Utah work is not a black box.
Frequently Asked Questions
Usually one of three things. The circuit is overloaded, meaning too much is running on it. There is a short circuit or ground fault in the wiring or in a plugged-in device. Or the breaker itself has worn out and now trips below its rating. A breaker that trips repeatedly is doing its job, so do not keep resetting it. Get it looked at.
Burning smells, smoke, melted or discolored plastic, hot outlets or switch plates, sparks, buzzing from the panel, or a breaker that trips instantly every time you reset it. Also call if wiring got wet or damaged. Turn off the circuit if you can do it safely, and phone us.
Small repairs are often within a day or two, and same-day is sometimes possible depending on where you are and how the schedule looks. Safety issues move to the front of the line. We will give you a real window on the phone.
Common causes are a loose connection at the fixture, switch, or outlet, a failing dimmer paired with LED bulbs, or a loose neutral. Flickering across the whole house, or dimming every time an appliance starts, can point to a problem at the panel or the utility connection. That kind is worth checking soon rather than later.
Yes, and it is one of the most common calls we get. Sometimes it is a tripped GFCI somewhere else in the house, sometimes a failed device, sometimes a loose connection further up the circuit. We trace it instead of guessing.
before and after
